Features
* This vacuum pump uses individual pumps to make up the
complete unit,each pump is in itself a multistage ejector unit. Each individual pump can be stacked together this creating a modular manifold based system.
It can be operated using just one control valve whilst retaining individual vacuum lines separate to one another, therefore if any leakage or surface deformation occurs and one pad loses its vacuum, it does not effect the vacuum level in the other pads. Pumps can be stacked up from 2-16 unit depending upon requirements. The pumps can have seal material options of Viton® & EPDM for corrosive and acidic applications.
Remark: FVM5-the most 16 stacks ( can use 2 silencers between12-16 stacks )
FVM10-the most 12 stacks ( can use 2 silencers between 6-12 stacks )
Vacuum flow( l/min ) at different vacuum levels ( -kPa )
Model |
Vacuum flow( l/min ) at different vacuum levels ( -kPa ) |
0 |
10 |
20 |
30 |
40 |
50 |
60 |
70 |
80 |
FVM5x1 |
27 |
15 |
12.5 |
11 |
10 |
7.5 |
5.5 |
2 |
0.6 |
FVM10x1 |
35 |
28 |
24 |
22 |
18 |
15 |
11 |
5 |
1.35 |
Evacuation time ( s/l ) to reach different vacuum levels ( -kPa )
Model |
Evacuation time ( s/l ) to reach different vacuum levels ( -kPa ) |
10 |
20 |
30 |
40 |
50 |
60 |
70 |
80 |
FVM5x1 |
0.2 |
0.59 |
1.10 |
1.58 |
2.4 |
3.52 |
5.3 |
10.25 |
FVM10x1 |
0.12 |
0.28 |
0.6 |
0.81 |
1.18 |
1.82 |
2.65 |
5.21 |
Online Inquiry