Specifications
| Wiring method | RCD, RDD : 2 wire, RND, RNDE, RPD, RPDE : 3 wire |
|---|---|
| Switching logic | RCD : SPST N.O., RDD, RND, RNDE, RPD, RPDE : Solid state output, N.O. |
| Switch type | RCD : Reed switch, RDD : Without contact, RND, RNDE : NPN current sinking, RPD, RPDE : PNP current sourcing |
| Operating voltage | RCD : 5~120V DC/AC, RDD, RND, RNDE, RPD, RPDE : 5~30V DC |
| Switching current | RCD : 100mA max. RDD : 50mA max. RND, RNDE, RPD, RPDE : 200mA max. |
| Switching rating | RCD : 10W max. RDD : 1.5W max. RND, RNDE, RPD, RPDE : 6W max. (※1) |
| Current consumption | RND, RPD : 8 mA@24V DC max. RNDE, RPDE : 6 mA@24V DC max. |
| Voltage drop | RCD : 3.5V max. RDD : 3.7V max. RND, RPD : 1V@200mA max. RNDE, RPDE : 0.5V@200mA max. |
| Leakage current | RDD : 0.1mA max. RND, RNDE, RPD, RPDE : 0.01mA max. |
| Indicat | RCD, RDD, RND, RNDE : Red LED, RPD, RPDE : Green LED |
| Cable | RCD, RDD : φ2.8, 2C, PUR; RND, RNDE, RPD, RPDE : φ2.8, 3C, PUR |
| Temperature range | －10℃~+70℃ ( No freezing ) |
| Shock | RCD : 30G, RDD, RND, RNDE, RPD, RPDE : 50G (※2) |
| Vibration | 9G (※3) |
| Enclosure classification | IEC 60529 IP67 |
| Protection circuit | RCD : 1, RND, RPD : 2, 3, 4 RDD, RNDE, RPDE : 3,4 (※4) |
| Weight | 20g ( 2m Cable ) |
| Remark | ※1 : Warning: Never exceed rating ( watt = voltage × amperage ). Permanent damage to sensor will occur. ※2 : Sin wave / X.Y.Z. 3 directions / 3 times each direction / 11ms each time. ※3 : Double amplitude 1.5mm / 10Hz~55Hz~10Hz(Sweep 1min) / X.Y.Z. 3 directions / 1 hour each time. ※4 : 1=None / 2=Short-circuit / 3=Power source reverse polarity / 4=Surge suppression. |
Online Inquiry