Sensor Switch - RDFE
Wiring method: 2 wire, 3 wire, Operating voltage: 5~30V DC, Assembling style: MCFB, MCMJP, MCGS.
Specifications
| Wiring method | 2 wire, 3 wire |
|---|---|
| Switching logic | Solid state output, N.O. |
| Switch type | Non-contact, NPN current sinking, PNP current sourcing |
| Operating voltage | 5 ~ 30V DC |
| Switching current | 50mA, 80mA (max.) |
| Switching rating | 1.5W, 2.2W (max.) (※1) |
| Current consumption | 10mA, 6mA @24V DC (max.) |
| Voltage drop | 3.5V, 0.5V @ 50mA (max.) |
| Leakage current | 0.1mA(40uA), 0.01mA (max.) |
| Indicat | Red LED |
| Cable | φ2.6,2C, PVC, φ2.6,3C, PVC |
| Operating Frequency | 1000 Hz |
| Temperature range | －10 ~ ＋70℃( No freezing ) |
| Shock | 50G (※2) |
| Vibration | 9G (※3) |
| Enclosure classification | IEC 60529 IP67 |
| Protection circuit | 3, 4 (※4) |
| Weight | 12.8g ( 1m Cable) / 23.8g ( 2m Cable ) |
| Remark | ※1 : Warning: Never exceed rating ( watt = voltage × amperage ). Permanent damage to sensor will occur. ※2 : Sin wave / X.Y.Z. 3 directions / 3 times each direction / 11ms each time. ※3 : Double amplitude 1.5mm / 10Hz~55Hz~10Hz(Sweep 1min) / X.Y.Z. 3 directions / 1 hour each time. ※4 : 1=None / 2=Short-circuit / 3=Power source reverse polarity / 4=Surge suppression. |
Online Inquiry